Welcome to the forum.

This is where you introduce yourself.
Message
Author
Farside
Posts: 46
Joined: Thu Oct 18, 2018 6:46 pm
Has thanked: 5 times
Been thanked: 37 times

Re: Welcome to the forum.

#61 Post by Farside » Thu Jan 03, 2019 10:41 pm

Hi all,

I'm a New Zealander living in Canada (zone 3). I am interested in permaculture and studied geophysics at university back in the 1990's and I remember my professors talking about this topic.

I spend quite a bit of time designing and testing permaculture systems for very cold climates. We get 90 frost free days a year here which makes growing vegetables a challenge.

I hope I can contribute some valuable things to the community.

Benni Flug
Posts: 2
Joined: Sun Jan 13, 2019 8:02 pm
Been thanked: 3 times

Re: Welcome to the forum.

#62 Post by Benni Flug » Mon Jan 14, 2019 12:13 am

Hi All
From Iceland
I have A6P licence from FAA and working knowledge on CNC machinery. If I can help

User avatar
Andy F
Posts: 956
Joined: Mon Aug 20, 2018 8:07 pm
Has thanked: 320 times
Been thanked: 340 times

Re: Welcome to the forum.

#63 Post by Andy F » Mon Jan 14, 2019 3:51 am

Benni Flug wrote:
Mon Jan 14, 2019 12:13 am
Hi All
From Iceland
I have A6P licence from FAA and working knowledge on CNC machinery. If I can help
Welcome to IAForum Benni Flug! Is it cold in Iceland this year? Just kidding...
Good on you for CNC smarts, I'm impressed! You would be helpful too. Are you working steady in shop now? What kind of parts made?
I did the millwork for the 3" holey wings on Star Wars program (anti-guided missile weapon "birds") from Al, or Titanium, can't remember, was the 80s, 3 wings from a round bar.
Lot of fun "deburring" yuck.
I never made it past Bridgeport Mills, but I did install Digital Readouts on 2 mills :mrgreen:
Me and Lathes, not too much experience except millwork for the projects. Fun machinery.

Anyhow, welcome here!
I have a Library. Winter bookworm. Peaceful dissent, is a true anarchist. https://www.archive.org :mrgreen:

Benni Flug
Posts: 2
Joined: Sun Jan 13, 2019 8:02 pm
Been thanked: 3 times

Re: Welcome to the forum.

#64 Post by Benni Flug » Tue Jan 15, 2019 12:21 am

Hi Andy F
Thank you for the answer.
I have small shop with CNC punch press, CNC router and CNC milling machine. The CNC machine are based on aircraft autopilot 200v 400 HZ the basic milling machine is the foundation of to days technology.
The Ice age farmer don´'t have to be stone age farmer. I would like to talk to somebody willing to make robotic planting machine.

Post Reply