Pastured Broiler System

Message
Author
Farside
Posts: 90
Joined: Thu Oct 18, 2018 6:46 pm
Has thanked: 13 times
Been thanked: 78 times

Re: Pastured Broiler System

#11 Post by Farside » Fri Feb 08, 2019 4:10 pm

Here is a photo of my prototype roof truss system:
Assembled.jpg
Assembled.jpg (75.05 KiB) Viewed 79 times
The pieces of wood sticking out the sides will be 6ft long and come together to form a triangular shape. Two of these triangle shapes are then bolted together to form a peaked roof.

Here is a photo of the system disassembled so you can see the different parts and how they join together using 2 bolts:
Exploded.jpg
Exploded.jpg (86.93 KiB) Viewed 79 times
The ridge beam is an 9ft long piece of wood that attaches to a wooden block via a bolt that screws into a barrel nut embedded in the block as shown below:
Ridge Joint.jpg
Ridge Joint.jpg (73.3 KiB) Viewed 79 times

Post Reply